DSCCB

Structure containing hardware settings for the current board. Some elements are unique to particular boards.

Structure Definition

public struct DSCCB
    {
        public byte boardtype;
        public short boardnum;
        public ushort base_address;  
        public byte int_level;
        public byte DAC_Config;
        public int clock_freq;      
        public byte int_level1;
        public byte int_level2;
        public byte int_level3;
        public ushort fpga;
        public int FPGAIDMajor;   
        public int FPGAIDMinor;  
        public int FPGARev;       
        public int BoardIDMajor;  
        public int BoardIDMinor;  
        public int BoardRev;     

    }

Structure Members

Name	Description	Applicable Boards
boardtype	The board type constant; automatically filled by dscInitBoard;	Diamond-MM-16RP-AT
boardnum	The handle to the board; automatically filled in by dscInitBoard	Diamond-MM-16RP-AT
base_address	Base address of the board; refer to the board's user manual for valid base address settings	Diamond-MM-16RP-AT
int_level	Interrupt level of the board; used for boards with only one IRQ.	Diamond-MM-16RP-AT
DAC_Config	Resolution of the DAC to use in the code. If this flag is set to 0, the driver will always use the DAC as a 12 bit DAC - This helps for backward compatibility. When set to 1, 16 bit DAC will be used. This is only used by the DMM32DX board.For all other boards this field is ignored	NA
clock_freq	Counter maximium frequency	Diamond-MM-16RP-AT
int_level1	Interrupt level 1	NA
int_level2	Interrupt level 2	NA
int_level3	Interrupt level 3	NA
fpga	FPGA ID	Diamond-MM-16RP-AT
FPGAIDMajor	FPGA ID Major	NA
FPGAIDMinor	FPGA ID Minor	NA
FPGARev	FPGA revision	NA
BoardIDMajor	Board ID Major	NA
BoardIDMinor	Board ID Minor	NA
BoardRev	Board revision	NA