DSCDACS

Structure containing D/A conversion scan settings. This structure is used when performing analog output on several channels simultaneously. One array is filled with data for each channel, and a second array is filled with flags indicating which channels to change. The unselected channels are unchanged.

Structure Definition

typedef struct {

    BOOL channel_enable[16];
    DSCDACODE* output_codes;
    DSCDACODE DACode[4];
    
} DSCDACS;

Structure Members

Name

Description

Applicable Boards

channel_enable[16]

Input Array of flags that selects which analog output channels to change. Select TRUE for each location (0-15) for which you want to output new data.

Aries,Diamond-MM-16-AT,Diamond-MM-16RP-AT,Diamond-MM-32DX-AT, Diamond-MM-32X-AT,Diamond-MM-AT,Helix,DS-MPE-DAQ0804,Ruby-MM-1616,Zeta

output_codes

Input Array of output codes to send to the corresponding selected channels in channel_enable[]. Locations to use are 0-15.

Diamond-MM-16-AT,Diamond-MM-16RP-AT,Diamond-MM-32DX-AT, Diamond-MM-32X-AT,Diamond-MM-AT,Ruby-MM-1616

DACode[4]

Input Array of output codes to send to the corresponding selected channels in channel_enable[]. Locations to use are 0-3.

Aries,Helix,DS-MPE-DAQ0804,Zeta

PreviousDSCDACALPARAMSNextDSCDASETTINGS

Last updated