dscSetReferenceVoltages()

byte dscSetReferenceVoltages(short board, IntPtr refs);

Stores the autocalibration reference voltages in the EEPROM. These voltages are measured on-board and stored in the EEPROM during the factory calibration process. This is a utility function that normally does not need to be called in a user application.

Input Parameters

Name	Description
board	The handle of the board to operate on
refs	Array containing the reference voltages stored in the EEPROM. These are the voltages from the on-board precision voltage divider circuit that are used for autocalibration. During autocalibration, the driver software will measure the actual reference voltages and calibrate the board until the A/D readings match the stored values. The array size is 8 elements.

Return Value

Error code or 0.