7.1 Appendix A: Steps to make USB/ M.2 2242 drive bootable

i. Open a command prompt with administrator privilege. ii. Run the following commands:

Step to create M.2 2242 bootable.

• C:\Windows\system32> diskpart Microsoft DiskPart version 6.1.7601 Copyright (C) 1999-2008 Microsoft Corporation. On computer: BIOS-8388

• DISKPART> list disk Disk ### Status Size Free Dyn Gpt

Disk 0 Online 232 GB 0 KB * Disk 1 Online 59 GB 1024 KB Note: here disk 1 is the USBdrive2 that needs to be made bootable, please take care following step will remove all the data from the disk so select the correct Disk.

• DISKPART> select disk 1 Disk 1 is now the selected disk.

• DISKPART> clean DiskPart succeeded in cleaning the disk.

• DISKPART> create partition primary size DiskPart succeeded in creating the specified partition.

• DISKPART> select partition 1

• DISKPART> active

• DISKPART> format fs=ntfs quick

• DISKPART> assign letter=W

• DISKPART> create partition primary DiskPart succeeded in creating the specified partition.

• DISKPART> active

• DISKPART> format fs=ntfs quick

• DISKPART> assign letter=S

• DISKPART> exit

M.2 2242 drive is now bootable.