15.1. Heat Sink
The heat sink, DSC part no. 6883111, is 16.6mm high and is the same size as the module, 55x84mm. It is mounted on the top of the board using the four corner mounting holes. The heat sink holes are clear to facilitate the use of M2.5 screws inserting through the heat sink and catching in the threaded spacers installed below the module. Height is measured from the top of the EPSM-10GX4 PCB. A STEP file and mechanical drawing are available. An image of the heat sink mounted on the EPSM-10GX4 is shown below.
Heat Sink Dimensions
Last updated
