7.2 JNMMCANLoopBack Description

JNMMCANLoopBack demo application will provides the user to enter the mode of operation for CAN (0-3) whether in transmit or receive mode.

1. For ISA mode : Enter the Base address and DIO address( PCI not required)

2. Enter the CAN Port number(0-3).

3. Enter the baud rate for CAN Port(0-3).

4. Enter the mode of operation for CAN Port(0-3) : Tx(0)/Rx(1).

Mode of operation for selected CAN Port(0-3)

TX mode:

1. Enter the message type(0-STD,1-EXT).

2. Enter the Transfer buffer type(0-PTB,1-STB)

3. Enter the message ID.

4. Enter the RTR.(0-Disable,1-Enable)

5. Enter the data length.

6. Enter the Tx data.

7. Press “Q” to terminate application.

Rx mode:

1. Press any key to terminate the application.