Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.

6.4 To enable windows feature

  • Enable a specific feature in the image. You can use the /all argument to enable all of the parent features in the same command. To service an offline image, specify the location of the mounted image directory. For example, to enable all TFTP feature, provide the below command.

Dism /Image:C:\test\offline /Enable-Feature /FeatureName:TFTP /All

Previous6.3 To find available windows feature in imageNext6.5 To disable windows feature

Last updated

Was this helpful?