Diamond-MM-16RP-AT

This product is supported for DSCUD 8.0 and above.

Overview

DMM-16RP-AT is a of PC/104 and PC/104-Plus I/O modules featuring analog and digital I/O modules. The module is ideal for add-on data acquisition I/O expansion in embedded and OEM applications. It offers 16 single ended or 8 differential 16-bit analog inputs with an aggregate sample rate of 100 KHz maximum, 512 sample A/D FIFO, four 12-bit analog outputs, and 16 digital I/O lines. The buffered digital I/O lines can be optionally configured as either pulse width modulators or counter/timers.

Board Initialization

To use the Diamond-MM-16RP-AT board in an appllication using the UD, the dscInitBoard function should use the board macro DSC_DMM16RPAT. This is shown in the example below.

dscInitBoard(DSC_DMM16RPAT, &dsccb, &board );

Analog Input

Max Input Channels:	16 (single-ended) or 8 (differential)
A/D Resolution:	16 bits (1/65536 of full-scale)
Data range:	-32768 to +32767 for all voltrage ranges
Input Ranges (Bipolar):	±10V, ±5V, ±2.5V, ±1.25V
Input Ranges (Unipolar):	0-10V, 0-5V,0-2.5V
Supported Conversion Triggers:	Software, External digital signal, programmable clock.
Maximum Conversion Rate (Software Command):	approx. 100,000 samples per second, depending on code and operating system
FIFO:	512 samples with Programmable interrupt threshold

Analog Output

Max Output Channels:	4
D/A Resolution:	12 bits (1/4096 of full scale)
Data range:	0 to 4095 for all voltage ranges
Bipolar Output Ranges:	±5V
Unipolar Output Ranges:	0-5V, 0 – (user-programmable)

Digital I/O

Max Ports:	2, two 8-bit ports and Prometheus require direction to be set with DscDIOSetConfig() before use. All DIO lines power-up in input mode and have readback capability. All DIO lines have User-selectable 10K pull resistors that can be configured for all pull-up or all pull-down with a jumper.

Diamond-MM-16-AT Universal Driver Functions

• dscADAutoCal()
• dscADCalVerify()
• dscADIntStatus()
• dscADSample()
• dscADSampleInt()
• dscADScan()
• dscADScanInt()
• dscADSetChannel()
• dscADSetScan()
• dscADSetSettings()
• dscCancelOpType()
• dscCounterDirectSet()
• dscCounterRead()
• dscCounterSetRate()
• dscCounterSetRateSingle()
• dscDAAutoCal()
• dscDACalVerify()
• dscDAConvert()
• dscDAConvertScan()
• dscDIOInputBit()
• dscDIOInputByte()
• dscDIOOutputBit()
• dscDIOOutputByte()
• dscDIOSetConfig()
• dscFifoStatus()
• dscGetEEPROM()
• dscGetReferenceVoltages()
• dscGetStatus()
• dscLEDTest()
• dscSetCalMux()
• dscSetEEPROM()
• dscSetReferenceVoltages()
• dscSetTrimDac()
• dscSetUserInterruptFunction()
• dscUserInt()