dscAACCommand

#define AAC_CMD_HOLD 0x10
#define AAC_CMD_REL 0x08
#define AAC_CMD_RESET 0x04
#define AAC_CMD_ABORT 0x02
#define AAC_CMD_TRIG 0x01 DWORD

BYTE dscAACCommand(DSCB board, DWORD cmd)

Sets the commands for auto auto-calibration. These commands can be used to enable, disable, trigger, and reset the auto auto-calibration

Input Parameters

Name	Description
DSCB	The handle of the board to operate on
Cmd	Command used to enable, disable, trigger, and reset auto auto-calibration. Masks are AAC_CMD_XXX

Return Value

Error code or 0.