DSCADINTSTATUS
Last updated
Last updated
Name
Description
Applicable Boards
OpStatus
Status of A/D operation. 0 = not running and 1 = running
DS-MPE-DAQ0804, Zeta, Helix, Aries
NumConversions
Number of convertions since interrupt started
DS-MPE-DAQ0804, Zeta, Helix, Aries, Diamond-MM-16RP-AT
Cycle
To determine the mode of A/D interrupt operation. 0 = one-shot operation and 1 = continuous operation
DS-MPE-DAQ0804, Zeta, Helix, Aries, Diamond-MM-16RP-AT
FIFODepth
The depth of FIFO which is required to perform A/D interrupt
DS-MPE-DAQ0804, Zeta, Helix, Aries, Diamond-MM-16RP-AT
UF
Flag to determine the FIFO underflow. 0 = no underflow and 1 = FIFO underflow. Underflow is attempt to read was made when FIFO is empty
Aries
OF
Flag to determine the FIFO overflow. 0 = no overflow and 1 = FIFO overflow. Overflow is attempt to write into FIFO when FIFO was full
DS-MPE-DAQ0804, Zeta, Helix, Aries, Diamond-MM-16RP-AT
FF
Flag to determine the status of FIFO. 0 = FIFO not full and 1 = FIFO is full
DS-MPE-DAQ0804, Zeta, Helix, Aries, Diamond-MM-16RP-AT
TF
Flag to determine the comparison between A/D samples in FIFO with programmed threshold. 0 = number of A/D samples in FIFO is less than the programmed threshold, 1 = number of A/D samples in FIFO is equal to or greater than the programmed threshold
DS-MPE-DAQ0804, Zeta, Helix, Aries
EF
Flag to determine the FIFO status. 0 = FIFO has unread data in it, 1 = FIFO is empty
DS-MPE-DAQ0804, Zeta, Helix, Aries, Diamond-MM-16RP-AT
HF
FIFO half full flag; 0 = FIFO is less than half full; 1 = FIFO is at least half full
Diamond-MM-16RP-AT