dscSetCalMux()

byte dscSetCalMux(short board, int on);

Turns the calibration multiplexor on or off. The calmux is used only for autocalibration. A user application will only need this function if it is implementing a custom calibration routine. A slight delay of about 10 microseconds occurs when enabling or disabling the calibration multiplexor in order to allow the analog input circuit to settle.

Name

Description

board

The handle of the board to operate on

on

TRUE for on or FALSE for off

Return Value

Error code or 0.

PreviousdscADSetChannel()NextdscSetReferenceVoltages()

Last updated