1.Quick Start

This section describes how to perform the following:

• Log in and reset configuration to factory defaults

• Set device hostname and admin user password

• Set VLAN 1 IP address

• Verify connectivity using ‘ping’

• Display the current configuration and save it to flash storage

The following assumes the device is powered on and has a functional connection to a computer using the serial console port on the device (115200 baud, no parity, 8 data bits, 1 stop bit, no flow control). The computer must be running a terminal emulator such as TeraTerm or PuTTY on Windows, or Minicom on Linux.