Ziggy
Overview
Ziggy is a Jetson TX2 module-based board with rich graphics and camera input capability. This base board converts Jetson TX2 module into a complete embedded system by providing interface circuitry, I/O connectors for all the major features of the module, camera interface, power supply and additional I/O capability.
Ziggy TX2 Base Board redefines possibility; a combination of performance, power efficiency, integrated deep learning capabilities and rich I/O remove the barriers to a new generation of products
The base board also contains a Micro SD card for storage option with all key I/O connectors placed along one edge for cable-free installation.
Features
Supports A/D channels 0-5(external input) and 12 -15(on-board voltage)
Supports A/D single ended.
Supports D/A conversion.
Supports port A: 0-7(8 bits), port B: 0-4(5 bits) and port C: 0-7(8 bits).
Supports temperature read.
Supports FAN control & User Led.
Supports 1 camera.
Pin out diagram
Analog Input
Max Input Channels: | 0 to 5 (Single ended) |
A/D Resolution: | 12 bits |
Data range: | 0 to 4095 |
Supported Conversion Triggers: | Software initiated A/D conversion |
A/D Reference | External reference(3.3 V) |
Analog Output
Max Output Channels: | 2 |
D/A Resolution: | 12 bits |
Data range: | 0 to 4095 |
Digital I/O
Max Ports: | Supports 3 DIO ports namely Port A, Port B and Port C. (Port A have 0 to 7 bits, Port B have 0 to 4 bits, Port C have 0 to 7 bits.) |
Ziggy SAMD51 Functions
Last updated